843-236-3399
Mold Inspections & Testing South Carolina

licensed-certified-mold-inspection-south-carolina

Professional Mold Inspection & Testing South Carolina

If you suspect a mold-related issue or an underlying moisture problem that could be contributing to mold growth, your first step should be to consider a mold inspection with mold testing. A trained and certified mold inspector in South Carolina will be able to identify the mold problem, determine the cause of the problem and prescribe an effective cleanup solution.

Through mold testing we will be able to determine if you have elevated indoor mold counts, how elevated and what species of mold is present. If you suspect indoor mold growth in your home, basement, attic, crawl space or commercial building, or if you are concerned about black mold or toxic mold, call Mastertech of Myrtle Beach today! 1-843-236-3399.
Professional-mold-testing-myrtle-beach-sc

Our mold inspectors are fully trained, licensed and certified to perform mold inspections and mold testing throughout the Myrtle Beach SC area and parts of North Carolina. If you need a a professional mold inspection in Myrtle Beach SC, our trusted mold inspectors have the necessary skills, tools and knowledge to help.

What to expect from a Mastertech of Myrtle Beach Mold Inspection:

01

Visual Inspection:

First, our inspector will conduct a full visual inspection of the interior and exterior of the residential or commercial property to identify any conditions that could be contributing to mold development.

02

Digital Documentation:

Thorough documentation is important for the both our inspector and our client. Detailed documentation will provide a clear reference for the findings. Digital imaging is the easiest way for your mold inspector to relay his or her findings. We’ll take pictures of all the areas of concern so you see exactly what we saw during your mold inspection.

03

Thermal Imaging:

Damp or wet building materials are almost always cooler than dry materials. Our inspectors will use thermal imaging cameras (or infrared cameras) to detect temperature differences in (and often behind) building materials. With this information, your inspector will be able to map out moisture patterns and trace the moisture source.

04

Moisture Mapping:

Since mold needs moisture to develop and thrive, finding that source of moisture is very important. Moisture mapping with the use of moisture meters will allow us to trace all damp building materials to gain an understanding of moisture patterns. Testing for moisture also helps us determine if water leaks have been resolved or if they are actively leaking and can locate where water damage starts and stops.

05

Airborne Mold Testing:

Your mold inspector may need to collect air samples to determine if your indoor mold spore levels are higher than they should be.

06

Surface Mold Testing:

Is it just water staining, or is it mold? Surface testing with mold swabs or bio tape lifts will answer those questions. In many cases, surface testing isn’t necessary if mold growth is visibly obvious.

07

Inner Wall Mold Testing:

When mold is suspected behind a wall or above a ceiling, those areas should be tested. Today’s mold testing technologies and techniques allow mold inspectors to take air and surface samples from wall or ceiling voids without causing unnecessary damage to the property.

08

Mold Inspection Summary Report:

Your inspector will compile all of the findings, including all the information gathered on site and a detailed discussion of the mold testing lab report, to generate a clear, concise and easy to read report.

09

Scope of Work:

Upon request, your mold inspector will design a mold remediation plan specific to your property. Your scope of work will include cleanup suggestions as well as preventative measures that are necessary to keep mold from returning.

10

PRV Testing (Post Remediation Verification Testing):

Also referred to as clearance testing. This is a mold inspection after the remediation is complete. Since we’re removing a bio hazard, It’s important to know that the job was done right – the first time. PRV Testing will determine if cleanup efforts were successful or if further cleanup is necessary.

Our inspectors at Mastertech Environmental are carefully trained and certified to conduct mold inspections and mold testing throughout South Carolina and parts of North Carolina. We take pride in our detailed and thorough approach. Each Mastertech mold inspector must undergo intensive technical and safety training to ensure the best services possible.

mold-inspection-myrtle-beach-south-carolina


Mastertech of Myrtle Beach Mold Inspection Process:

A thorough visual inspection of the residential or commercial property (inside & out).

Digital documentation of our findings.

Thermal imaging (Infrared Camera Inspection) of potential problem areas.

Moisture mapping in areas where water intrusion may be a problem.

Indoor airborne mold testing to determine if mold levels are elevated inside your home or business.

Swab or bio tape mold samples to determine if mold is present on surfaces or belongings.

Inner wall testing to determine if mold is present in wall or ceiling voids.

A detailed report outlining what we did, what we found, where we found it and what to do next.

Professional Mold Inspection South Carolina Service Areas:

If you have any questions regarding our mold inspection and mold testing services in South Carolina, we would be happy to go through the process with you over the phone.

Call us today 1-843-236-3399

Contact us

Contact us for help, additional info or assistance and we'll be with you in no time!


Enter your name

Enter your email

Enter your phone number

Your message